3D Printed Joints – No Screws or Glue | CAD & STL Files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Learn to join 3D printed parts using filament pins. Includes dovetail joints, STEP files and ready-to-print STLs.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Full Video Tutorial
Watch the complete step-by-step tutorial on YouTube:
Learn how to design and 3D print removable joints using only small pieces of 1.75 mm filament as locking pins. No screws, glue, or threaded inserts required!
In the accompanying YouTube tutorial, I explain how to design these joints from scratch in Fusion 360, how they work, and how to adjust the tolerances to achieve a reliable fit.
What's included?
This project includes three joint designs:
Super Simple Joint: A straightforward connection using an intermediate connector and filament pins.
Simple Joint: A similar connection with an additional alignment feature.
Rounded Dovetail Joint: A more integrated connection where the dovetail geometry carries the main load and a filament pin prevents the parts from sliding apart.
The downloadable files include STL models for 3D printing and STEP files for editing or adapting the designs in your preferred CAD software.
NEW – Filament Pin Hole Calibration Test
I've also included a dedicated calibration model to help you find the right hole dimensions for your printer.
When using 1.75 mm filament as a locking pin, the fit is especially important. Ideally, the filament should slide into the hole by hand with a slight amount of friction, without being excessively loose or requiring too much force.
The holes use a teardrop shape to improve printability, particularly when printing horizontal holes without supports.
The calibration model contains a grid of holes with two variables:
Left to right: The hole diameter changes.
Top to bottom: The angle of the pointed upper section changes.
Simply print the calibration model, test your filament in the different holes, and identify the combination that gives you the best fit.
You can then use those dimensions in your own Fusion 360 designs, helping you avoid repeated trial-and-error prints.
Important: The ideal dimensions may vary depending on your printer, filament, material, and print settings.
How to use these files
Print the hole calibration test and find the best fit for your filament.
Download the joint design you want to use.
If necessary, adjust the hole dimensions and tolerances using the STEP files.
Print the joint components.
Assemble the parts and insert short pieces of 1.75 mm filament to lock them together.
The joints can also be disassembled by removing the filament pins.
Watch the full tutorial
In the video, I explain the complete design process in Fusion 360, including joint geometry, mechanical considerations, tolerances, and practical applications.
Designed by KNINcustom.