Sailor Moon Iron On

Recommended Print Settings

• Crucial Step — Mirroring: Mirror the model horizontally in your slicer before slicing (or flip on the Y-axis). This ensures the smooth, bed-textured side faces forward once ironed onto your shirt.

• Layer Height: 0.2 mm (1 layer) or 0.4 mm (2 layers).

• Infill: 100% Solid / Top/Bottom Patterns set to Rectilinear.

• Build Plate: Smooth PEI or glass for a glossy, uniform finish post-transfer.

• Filament Selection:

  • PETG (Recommended): High temperature resistance, durable in washing machines, excellent fabric grip.

  • TPU / Flex: Maximum elasticity for stretchy garments.

  • PLA: Works for decorative shirts or cold-wash items.

 Iron-On Transfer Guide

1. Iron Setup: Set household iron to 160°C – 180°C (320°F – 356°F) / Cotton/Wool setting. Turn STEAM OFF completely.

2. Work Surface: Lay the garment on a firm, hard surface (a wooden cutting board or sturdy table works better than a padded ironing board).

3. Cover with Parchment: Place the printed decal on the shirt with the textured bed-side facing UP. Place a sheet of baking/parchment paper directly over the print. (Never let the bare iron touch the plastic!)

4. Press (Front): Press down firmly with body weight for 20–30 seconds. Keep the iron stationary—do not slide it back and forth to avoid smearing detail.

5. Press (Back): Turn the shirt inside-out and iron the backside of the fabric behind the print for another 20 seconds to melt the plastic directly into the textile fibers.

6. Cool & Peel: Allow the print and parchment paper to cool completely to room temperature before peeling the paper away.