MedusaHC Ender 5+ Merc 1.1 Rear Toolhead Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MedusaHC Ender 5+ Merc 1.1 Rear Toolhead Mount
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use the rear as a docking station on the ender 5 plus merc 1.1 for the MedusaHC without changing the current setup too much.
Also included are the docking brackets for a 400mm 2020 extrusion that will line up the docks to the toolhead for swapping. Print of them and use M5x8mm screw with M5 t-nuts.
M3 screws needed for putting together FRONT, TOP & REAR:
M3 x 50 - 2
M3 x 40 - 1
Heat-set Inserts:
2 M5 heat-set inserts are needed for - REAR MGN Rail DB Mount
6 M5 heat-set inserts are need for - FRONT MGN Rail Belt Mount, this includes bltouch mount
2 M5 heat-set inserts are needed for - Mirrored BLtouch Mount