Apple EarPods Holder / Cable Wrap (USB-C Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shorter remix, so the inline remote sits neatly in the wrap without straining the cables.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
A small wrap-style holder for Apple EarPods with the USB-C connector. I took the existing USB-C version and made one small change.
Everything else, including the USB-C connector slot, is unchanged from the USB-C version. Per its designer, the connector fit is deliberately snug: a slightly wider slot let the connector work its way down the holder over time, so the cable loosened and unwrapped.
My cable measurements (EarPods USB-C)
121 cm from the base of the USB-C connector to the base of the EarPods, including strain relief
9 cm from the base of the EarPods to the remote, including strain relief
If your cable differs from these, you may need to tweak the length of the holder.
Print notes
Material: PETG
Layer height: 0.2 mm
Supports: none
Infill: 8%
Walls: 3
Remix of: Apple EarPods / Earbuds Holder, Wrap (USB-C) by https://www.printables.com/@ChrisBoorman_136327, which is itself a remix of the Lightning version by @stripetuning_193054. Full credit to both designers. This wouldn’t exist without their work.