MGN12 Luer lock syringe greaser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed version of the Superlube MGN12 greaser with a Luer Lock adapter on the bottom instead.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the hexagon on the back can be quite brittle it should be printed vertically with the hexagon at the base. The part is designed so the Luer Lock part is to be glued on or welded with acetone if you choose ABS.
I tried to print the part in one piece on my U1 but has issues with supports so I chose to just leave it 2 pieces. If you wish to try printing it in 1 piece use the slicer to merge the parts.
If printing in the vertical orientation it should not require any supports. I used default slicer values for printing so you can experiment if you like and see what you get quality wise.