Measuring Cups (nested) with Metric Equivalents
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of measuring cups labeled with cups and with approximate metric equivalents.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
WARNING : 3D printed materials are only "food safe" under limited circumstances, so the use of these measuring cups for cooking purposes is subject to those limitations. I made these cups for use in my shop for non-food purposes.
This set of measuring cups is primarily for cup size measurements, but I have included approximate metric equivalents in the labels. The cups also include internal marker lines in some cases for fractional cup measurements; for example, the 1/2 cup measure includes an internal marker line for 1/4 cup.
The bottom edge the cups are chamfered to facilitate clean printing. The internal bottoms of the cups are filleted (curved) to make them easier to clean (see section view).
CUPS | ml | ml | Internal |
|---|---|---|---|
1/4 | 59.147 | 60 | none |
1/3 | 78.863 | 80 | none |
1/2 | 118.294 | 120 | 1/4, 1/3 |
2/3 | 157.725 | 160 | 1/4, 1/2, 1/3 |
3/4 | 177.441 | 180 | 1/4, 1/2, 1/3, 2/3 |
1 | 236.588 | 240 | 1/4, 1/2, 3/4, 1/3, 2/3 |
Print Instructions
I printed in PETG using these settings :
print in two colors with filament switching
0.2mm layer height
4 perimeters
5 bottom layers
no infill
top/bottom infill = concentric
supports under handle
Of course you can print these in PLA or other filament types according to your needs. If you don't want to use filament switching for two colors, you can also just print in a light color and then use a felt-tip pen to color the top layer.
CAD
The OnShape 3D CAD files for this are here :