1 / 5
Buntbartschlüssel Kima Nr. 1/ Indoor Room Key Kima Nr. 1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replica of a indoor roomkey of the type Kima Nr. 1
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Misplaced my original room key and quickly needed a spare.
Took some crude measurements and modeled a Nr. 1 Kima roomkey.
Print Instructions
I printed mine in regular PLA with the following settings:
Layer height 0.15mm
Infill 40%, gyroid
Perimeters: 5
I used a brim to keep it together and on the plate.
Key feels pretty solid with these settings and (un)locks the door with no issue.
I can't speak on longevity for PLA yet but if you want something more sturdy I suggest PETG/ABS/PC/PA.