1 / 3
Prusa i3 Mk3 Einsy Door with 40mm Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for 40mm fan mounted at Einsy's door, blow directly to PCB. The column is sized for Noctua NF-A4x10 40mm fan…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 576
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (17)Powiązane
This is for 40mm fan mounted at Einsy's door, blow directly to PCB.
The column is sized for Noctua NF-A4x10 40mm fan (hole spacing 32mm). If you use different fan, you might need to adjust the column slightly.
I use NF-A4x10 fan at 5V, and power directly from Einsy board's P3 port (pin1 for +5V, pin7 for GND).
Make sure you do some research before wiring!!!
Category: 3D Printers