ESP8266 WeMos D1 Mini Slim Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very slim case for the ESP8266 WeMos D1 Mini
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 353
- Wydruki
- 9
- Wyświetlenia
- 1590
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
UPDATE: Added a "Rugged" version with clips (pretty flimsy, take care) for an increased holding strength.
A very slim case for the WeMos D1 Mini
DISCLAIMER: I've designed this case to fit my WeMos board with very small tolerances. I hope it will fit as many boards as possible, but I'm sorry if it doesn't. Just test it and see!
If you only need a small enclosure to protect and to make your WeMos board look better, this one is for you!
I recommend printing the first layer with a higher flow rate to squish the material to the bed so the surface will look beter. Also, I've printed mine with a 0.1 layer height but I think a 0.2 will do as well.
...If you also need the pin headers, just tell me and I'll try to adapt the design...
Category: Electronics