1 / 4
Avan Caravan Under Sink Connection — zdjęcie 1
1 / 4

Avan Caravan Under Sink Connection

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the connection that goes from underneath the kitchen sink into the 19mm ID drain hose. Fits a 2013 Avan 525

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

My friend broke the connection that joins the kitchen sink on his 2013 Avan 525 to the 19mm inside diameter drain pipe, and could not find a replacement.    The existing collar that locks it in place was OK.  The "Tail" on the original was bigger than 19mm and was a very difficult fit into the drain pipe, and so the smaller diameter 19mm tail is now an easy fit.   There's a couple of photos that show where and how it fits.

Modelled with Tinkercad, and Printed on Prusa Mk4

PETG at 100% infill, with supports

I'd suggest using a thin smear of silicon on the mating surfaces on the outside of the cone section, as the 3d printed layer lines compromise the seal.

Tagi