Schwartz Ring (Spaceballs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of Lonestar's Schwartz Ring
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 129
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Since my friend could not get one in his size in time for our party, I made him one.
I include the ring top, ring band, and an example size 13 ring. The band and top slot into each other. I did this to simplify printing and so we could test sizes but only needed to print one top.
To size the ring just add a negative volume cylinder with your ring size in your slicer.
The ring is big and accommodates 3mm flat back rhinestones. If you scale it down, keep that in mind.
You can look this up online, but here are some sizes:
(There are also half sizes you may want to use to get you started.)
Ring Size | Diameter Cylinder to Cut (in mm) |
9 | 19 |
10 | 19.8 |
11 | 20.6 |
12 | 21.4 |
13 | 22.2 |
14 | 23 |