1 / 1
(1/4 Scale) F.A.R. Signals Twister DC — zdjęcie 1

(1/4 Scale) F.A.R. Signals Twister DC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My first mini siren to be canonically DC like the real thing (if it was atleast)

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Uses a motor with like 3000RPM, a LOT of 1/8in bolts & nuts, and that's all.
Before you ask i don't know which motor, all i know is it needs a motor.

To attach the rotor to the motor,  first make sure you are CERTIAN you have the configuration you want for the Twister DC, this siren from it's design is VERY hard to service and change configuration once put together, Second, Put the rotor and respective stator together, put the motor all the way into the rotor with a dash of glue at the end, leave the core to sit overnight for the glue to cure, and huzzah, complete, HOWEVER, you MUST make sure that the core is FACING INTAKE DOWN for the curing process, otherwise the glue will seep down to the stator and weld the core together.

Don't expect this to get updates, it won't.