BMW/Mini/PSA 1.6 (N14, N18, EP6) Crankshaft Lock Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aligning the crankshaft for setting timing, without a flywheel or flexplate.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Typically when replacing the timing chain or setting the timing on the BMW-PSA Prince engines, the flywheel or flexplate are used to set the crankshaft position by inserting a tool through the block. When the engine is on an engine stand (e.g., for a rebuild) this is not always possible, as a flywheel is often too thick to fit between the engine and stand. This tool is based off of an OEM flywheel and provides the hole for the pin that forms part of the timing tool kit that ensures the crankshaft is in the correct position when setting the camshaft timing.
Before printing please ensure that your choice of printer and filament are able to print without warping and with good dimensional accuracy in X and Y - the close fit of this part means that any warping or dimensional inaccuracy will likely prevent the tool from fitting onto the crankshaft tail.
Designed to be used with the original flywheel bolts (please clean the remaining original locking compound off the threads before using), the tool is used by pushing it onto the end of the crankshaft, taking care to align the dowel pin on the tail of the crank with the matching hole on the tool, before inserting and snugging down the flywheel bolts. Rotate the crankshaft until the leg of the tool with the timing hole is aligned with the hole in the bedplate, then insert the timing pin until it is seated fully in the tool. The cam timing process can then be completed as per the TIS, taking care to use a crank counterhold tool on the crank snout.