MeganeX MKI & MKII Comfort Facial Interface by Tirami XR & Studioform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultimate comfort facial interface for the Shiftall MeganeX 8K featuring the Misu-Fit™ face curve developed by Tirami XR
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 165
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
The physical version is now open for pre-orders on tiramixr.com!
People might know me from the Akari MeganeX Modular Interface, but this is a completely revamped model in collaboration with Studioform over the last several months, improving curve ergonomics, ease of printing, and simplifying many aspects of the gasket. The new proprietary face curve is called Misu-Fit™, and will be adapted to future facial interfaces for other headsets as well. Please keep updated on our official website at Tirami XR!
The interface is designed to work with these face pads from Studioform (referral link), and the pad thickness options are listed below:
8mm | 12mm | 14mm
(Use code TIRAMI to save 5% on your purchase on Studioform!)
You will need three M3x5 screws that come with your headset or bought separately in order to mount this gasket, and when mounting, it's easiest to start with the bottom two screws before the central one on the top. There are different mounts for different head straps, so make sure to choose the correct strap that you have before printing!
Generic Soft Strap Mount - The original MeganeX soft strap as well as the Razer soft strap
Bigscreen Beyond Mount - For any Bigscreen Beyond strap, such as the Audio strap or the Apple Vision Pro strap with this adapter here
Vive DAS Mount - For compatibility with the Vive DAS strap.
Quest 3 Mount - Coming soon!
If you like this model and would like to support me please consider purchasing with my referral link on Studioform above, or directly from my Ko-fi https://ko-fi.com/tiramixr, thanks!
Recommended to print using PETG or PCTG.
UPDATES
November 14, 2026
- Added new Vive DAS mount!
v1.2 - November 9, 2026
- Added side supports
- Refined mounting bracket further and clip angle
- Added fillets around sharp corners
v1.1 - October 25, 2026
- Extended mounting on the side by 0.4mm
- Slight bend for the front mounting points to better fit headset
- 0.5mm fillet across the whole model
- Chamfer to fit countersunk M3 screws
v1.0 - October 15, 2026
- Initial release!