Raspberry Pi Zero High Quality (HQ) Webcam case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This little project is a mix of 2 other projects that I've put together in order to make a Pi Webcam using the…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This little project is a mix of 2 other projects that I've put together in order to make a Pi Webcam using the shortest Pi Zero Camera cable that I had in stock !
So far the camera seams not to overheat or anything even if I haven't installed any heat sink but I still kept in mind the space for it when designing the case.
I still have to put a hole for the signal led.
Base uses M3x10 (Pi side)
Top uses M3x20 (Camera side)
heavily modified but based on:
Base : https://www.thingiverse.com/thing:2165832
Top : https://www.thingiverse.com/thing:4596348
Software : https://github.com/showmewebcam/showmewebcam
Print Settings
Printer:
SecKit SKGo2
Rafts:
No
Supports:
Yes
Resolution:
0.24
Infill:
20%
Filament:
Duramic 3D PETG
Black
Category: Camera