Nespresso Capsule Drawer – Under-Shelf Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nespresso Capsule Drawer – Under-Shelf Mount with 45° Tilt for 25 Capsules
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Open Community License v1.1
Nespresso Capsule Drawer – Under-Shelf Mount with 45° Tilt for 25 Capsules
A custom-designed, 3D-printable Nespresso capsule drawer that mounts underneath a shelf or similar surface. The drawer slides out and stays at a 45° angle, making it easy to see and access your capsules.
With space for 25 capsules, it keeps your coffee collection organised while saving space on your countertop.
Features
Holds 25 Nespresso capsules.
Slides out and stays at a 45° angle for easy access.
Mounts underneath a shelf or similar surface.
Front panel attaches using tight-fitting dovetail joints.
Assembly and mounting
Press the bracket into the drawer. Some force may be required. If the bracket feels loose or comes out, secure it with a small amount of super glue.
Slide the front panel onto the drawer’s dovetail joints. These are designed for a tight fit, so align the parts carefully and press them together gradually.
Hold the slider side brackets against the sides of the drawer, then press the slider top brackets into place.
Slide the drawer out to access the mounting holes.
Screw the bracket assembly to the underside of a shelf or similar surface.
Check that the drawer slides smoothly and stays in its 45° position before filling it with capsules.
Compatibility
Check the capsule dimensions against the model before printing, as Nespresso Original and Vertuo capsules differ in size.