Customizable Gear Row Trophy 18T/36T/18T - Untested Design Study
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three spur gears on a plinth. Untested native Playground study, not print-ready. Recipe and guide included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is an untested design study, not a proven print. Fit, clearances, tolerances and print behaviour have not been checked on a real printer, and nothing here promises that printed parts turn by hand. Treat the geometry as a starting point and test a small print before you commit to a large one.
A three-gear desk trophy with 18T/36T/18T spur gears, module 2, 8 mm wide, on a back plate and plinth. Playground's drive log reported three animated shafts; the screenshots do not convincingly demonstrate rotation.
Customize the native Playground commands in the attached recipe. Full commands and design notes: https://blog.truegeometry.com/0_0_0_0/blogs/post-1b506d22.html
STL files are format conversions of the native Playground meshes, made outside Playground with no geometry changes. No mesh repair, clearance adjustment, or print validation was performed. An assembled display STL is a geometry snapshot, not a print-in-place mechanism. Use the separate parts to inspect and plan an assembly. The native gear meshes contain 282 zero-area triangles. The separate native shells include overlapping shaft rotation stripes. These defects and overlaps are preserved, not repaired. The files are not print-ready. The attached guide shows how to run the recipe.
Full assembly STL in upright Z-up orientation, converted from the native Playground scene with no repair or union. This is a display snapshot, not a print-in-place mechanism. Separate overlapping shells and native zero-area triangles are retained [282 for Row]. No slicer or physical print test. Keep the component files for assembly planning.