Cricut Explore 5 & Maker 5Dust Cover Lid with Tool Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Closes the open slot in the top of your Cricut Explore 5 & Maker 5 and turns it into a two-part tool tray.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 134
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cricut Explore 5 & Maker 5 Dust Cover Lid with Tool Tray
The Cricut Explore 5 and Cricut Maker 5 have an open slot in the top of their lid, which lets dust settle straight into the machine. This tray closes that opening and turns it into useful storage. It sits flush in the lid and follows the machine’s rounded shape, so it looks like it came in the box. You get a handy spot for your pen, blade housing, weeding hook and other small tools.
The tray comes in two halves joined by a T-slot connector. You slide the connector into the channel where the halves meet, and it holds both halves firmly together. Glue is optional but not necessary. The same piece acts as a divider between the two compartments and as a grip to lift the whole tray out when you need to.
Features
Made to fit the open top of the Cricut Explore & Maker 5
Keeps dust out of the machine
Two compartments for pens, blades, weeding tools and accessories
T-slot connector joins both halves firmly, glue optional
Center connector doubles as divider and lifting grip
Rounded ends follow the shape of the Cricut lid for a clean, built-in look
Three parts on two plates, ready to print
Print Instructions
Requirements
Printer: build plate of at least 256 × 256 mm (each tray half is 194 mm long, so it does not fit an A1 Mini)
Filament: PLA
Support Material: Required
Plates
Plate 1: Tray left & right (both halves)
Plate 2: Handle (T-connector)
Print Settings
Layer Height: 0.2mm
Walls: 2
Infill: 15%
Supports: Tree (auto), not limited to the build plate. Needed for the connector grip, the T-slot channel and the rim around the tray
Removing the supports takes a little cleanup, but it’s worth it: the result is clean and all parts fit together tightly.
Assembly
Remove all supports and clean up the T-slot channel and the connector.
Place both tray halves end to end.
Slide the T-connector into the channel at the joint until both halves are locked together. A drop of glue is optional for extra hold.
Drop the tray into the opening on top of your Cricut Explore 5.
Did you print it? I’d love to see your setup! Please upload a make and leave a review to help others find this model.