Bracket for DC-DC Buck Converter LM2596S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a completely redesigned bracket for DC-DC Buck Converter LM2596S it is much more compact and it snaps into…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 599
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a completely redesigned bracket for DC-DC Buck Converter LM2596S it is much more compact and it snaps into place as long as your LM2596S has the same footprint as the footprint design linked below. I wanted this bracket to use very little material and it prints in approx 14 mins with less than 0.70 meters of filament.
DC-DC Buck Converter LM2596S footprint design https://www.thingiverse.com/thing:2523252
Version 5
The tab overhangs are not as pronounced as with version 6 so it allows of easier disconnect. It is recommended to use version 6.
Version 6
The tab overhangs are longer allowing for a more secure module, great for situations where vibration maybe a factor.
Version 6.5
Modified Version 6 with larger mounting holes
Version 6.5 ZIPTIE
Modified Version 6 with larger mounting holes and Ziptie holes for extract bracket safety in higher vibration applications..
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Category: Electronics