FACETS – Low-Poly Vase Generator, 6 Presets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design your own faceted vase in OpenSCAD – diamond or prism facets, twist, zigzag and pinch, always under 45°
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
FACETS is an original low-poly vase generator. Print one of the 6 presets straight away, or open the .scad in OpenSCAD and shape every facet yourself: sides, diamond or prism pattern, twist, zigzag and crystal pinch. A built-in safety check keeps every face under 45°, so whatever you create prints cleanly without supports.
Preset | Style | Sides | Size (Ø × H) |
|---|---|---|---|
Diamond Tower | Classic diamond facets, slim neck | 6 | 103 × 200 mm |
Crystal Bloom | Wide belly with crystal relief | 8 | 115 × 170 mm |
Spiral Prism | Flat sides with a 144° twist | 5 | 97 × 190 mm |
Gem Bowl | Low, wide gem-cut bowl | 10 | 156 × 110 mm |
Zigzag Column | Tall prism that twists back and forth | 7 | 91 × 210 mm |
Origami | Folded-paper look with deep pinch | 12 | 118 × 180 mm |
In the download
Item | What it is |
|---|---|
FACETS_Vase_Generator.scad | The customizer: presets and every setting |
STL/ | The 6 presets, ready to slice in any slicer |
3MF/ | The same presets as Bambu Studio projects, spiral vase on |
README.txt | Step-by-step guide |
How to customize
Install OpenSCAD (free) from openscad.org.
Open FACETS_Vase_Generator.scad and show the panel with Window › Customizer.
Pick a preset, or set Preset = Custom to unlock height, diameters, sides, tiers, pattern, twist, zigzag and pinch.
Choose the print mode: Vase mode (solid) for spiral vase printing, or Hollow for real walls (0.8–4 mm) and a watertight print.
Press F5 to preview, F6 to render and F7 to export the STL.
If a combination would go past 45°, FACETS lowers the tiers or the twist on its own – the preview always shows a printable vase.
Printing and upload checklist
Use | Print mode | Slicer settings |
|---|---|---|
Decor / dried flowers | Vase mode (solid) | Spiral vase ON, 0.4 mm nozzle, 0.20 mm layers, 4 bottom layers, PLA |
Sturdier tall vases | Vase mode (solid) | 0.6 mm nozzle, line width 0.8–1.0 mm |
Fresh flowers (watertight) | Hollow | Spiral vase OFF, 2–3 perimeters, 0% infill, 0 top layers |
In PrusaSlicer, spiral vase is under Print Settings › Layers and perimeters › Vertical shells › Spiral vase. Custom designs up to 250 mm tall need at least 250 mm of Z height (MK4 and Core One fit them).