1 / 2
Spinning Tops Set - Classic, Saucer and Gem, Long Spins, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Spinning Tops Set - Classic, Saucer and Gem, Long Spins, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three spinning tops with heavy rims for long spins: classic, wide saucer and faceted gem. Print stem-down, no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A quick print kids and adults both end up playing with: twist the knurled stem between finger and thumb and drop it. The weight sits out in the rim, where it keeps the top spinning.

DETAILS

• Classic (48 mm), Saucer (60 mm) and Gem (an eight-sided crystal, 46 mm).

• Prints stem-down with no supports: the body flares out at 45 degrees and the tip is printed last. Bambu Studio: 1 h 34, 40 g, no warnings (a small brim holds the stems).

• For the longest spins print with 100% infill or 6 walls, and use a smooth surface.

CUSTOMIZE (OpenSCAD)

Pick one top or all three, and the size.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi