90 Degree Corner Clamps - Woodworking Right Angle Helpers for Boxes and Frames, Set of 4 (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right-angle corner clamps for gluing boxes, frames and drawers square. Clamp through the windows. Set of 4, prints flat.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Glue up boxes, drawers, picture frames and cabinets dead square: push the two boards into the inside corner and clamp each one to its arm through the window with an F-clamp or spring clamp.
DETAILS
• Arms 80 mm long, 24 mm wide and 30 mm tall, with 15 mm clamp windows.
• A relief notch at the corner keeps glue squeeze-out from sticking and lets the corner sit tight.
• Prints flat with no supports: the right angle is in the XY plane, where printers are most accurate. Bambu Studio (set of 4): 4 h 14, 155 g, no warnings.
CUSTOMIZE (OpenSCAD)
Arm length, width, height, window size and how many to print.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.