Roborock Q7 Replacement Filter – 3D Printable Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roborock Q7 – 3D Printable Replacement Filter Part Give your Roborock Q7 a new lease of life with this 3D-printable
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
🖨 Recommended Print Settings
Printer: Artillery Sidewinder X1
Nozzle diameter: 0.4 mm
Material: PLA Basic
Layer quality: Standard
Infill density: 20%
Wall line count: 4
Top/Bottom thickness: 1.0 mm
Bottom layers: 4
Build plate adhesion: Skirt
Supports: Enabled (In tree)
💡 Printing Tips
Make sure the build plate is clean and properly leveled.
Check the first layer to ensure good bed adhesion.
No supports are enabled in the recommended profile.
Check the finished part's dimensions and fit before installing it in your robot.
⚠ Compatibility Notice
Designed for the Roborock Q7. Please verify the dimensions and compatibility with your specific model before printing.
This is an independent 3D-printed design and is not an official Roborock product. Always check that the printed component is suitable for your intended use.
If you find this model useful, consider giving it a like and sharing your print! 🚀
