Lotmaxx SC-10 Shark touch controller front holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did this front controller holder, because I usually print when I'm working. I wanted to see from the other side of…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I did this front controller holder, because I usually print when I'm working. I wanted to see from the other side of the room the print status or when the printer got an error without having to stand up from my desk.
The model clips onto the Lotmaxx logo part on the front of the printer.
!!!BEWARE THAT THIS MODEL EXTENDS BELOW THE PRINTER: if the printer is fully on a desk then the model won't fit. I designed so that the moving heatbed doesn't hit the model/controller, so the model is alligned to go below the printer. !!!
Print Settings
Printer:
Lotmaxx SC-10 Shark
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament:
Sunlu PLA
Green
Notes:
I printed this for testing purposes in Sunlu green PLA at nozzle temperature of 200 degrees (C) and bed temperature of 50 degrees (C). Supports are needed for this print.
This model was designed in Tinkercad. Feel free to copy/modify it using this link: https://www.tinkercad.com/things/hNtR6YJ1JLx
Category: 3D Printer Accessories