Vevor / UScutter Vinyl cutter USB strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strain relief for a Vevor or UScutter vinyl cutter for the usb port. Cutter brace - Little thinner and should work the…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Strain relief for a Vevor or UScutter vinyl cutter for the usb port.
Cutter brace - Little thinner and should work the stock nuts and bolts
Cutter brace V1 - is just little thicker and moved the usb port to the right a little bit.
When assembling, Put the usb cord in before you tighten down the nuts and bolts. Pretty much self aligned its self
I have not tested on a UScutter so... let me know if it works...
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Other