1 / 4
Ice Cream Hugger – Insulated Pint Holder — zdjęcie 1
1 / 4

Ice Cream Hugger – Insulated Pint Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Insulated holder for 480 ml ice cream cartons, with a handle and cutout for easy removal. No more frozen fingers!

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

🍨 Ice Cream Hugger – Insulated Pint Holder

My wife wanted a more comfortable way to enjoy her ice cream straight from the carton, so I designed this simple insulated holder with a handle.

The holder has a tapered interior to fit the ice cream carton and a front cutout to make removing it easier.

The 10 mm thick walls use low-density infill to provide some insulation, while the handle keeps your hands away from the cold container.

Already tested and approved by my wife! She says it's much more comfortable than holding the ice cream carton directly. 😊

📐 Dimensions & Compatibility

Designed for a 480 ml ice cream carton with approximately:

  • Top diameter: 92 mm

  • Bottom diameter: 70 mm

  • Carton height: 105 mm

The holder is slightly shorter than the carton, leaving the rim accessible.

Other brands with similar dimensions may also fit, but haven't been tested.

🖨 Printing Instructions

I printed mine using the following settings:

  • Material: Transparent PETG

  • Layer height: 0.28 mm

  • Walls: 2

  • Infill: 5% Gyroid

  • Supports: Tree supports for the handle

Important: Enable tree supports for the handle's overhangs.

Feel free to adjust the remaining print settings to your preferences.

Just a small practical project that makes enjoying ice cream a little more comfortable.

If you find it useful, I'd appreciate a like🚀

Happy printing! 😊

Tagi