Diopter for minoltas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This diopter, who looks redundant on a XD-s , works on all XD variants, SRT and some other bodies.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
You need 2 important things to make this diopter:
A lens with your prescription made in a material which will be able to be laser cutter, I bought from aliexpress this one and I cuted it with a Beambox pro from the university. the dimensions of the lens must be 21.3x15.1mm
M1 3mm screw
You must put the lens on the "down" part and then join the "down" and "up" parts with the screw, (important! if the lens keeps moving even if its inside the 3d printed parts, you can print the optional part "tope" to put it on the sides of the lens for it to not move), then with some effort you must put the eyecup on the outgoing part.
Then it should be ready!