A10M Ender 3 / Pro Front power supply mount (Hole/Flush Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(right and left front legs needs the parts edited so hold off on printing) Front power supply mount/Feet, Flush with…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
(right and left front legs needs the parts edited so hold off on printing)
Front power supply mount/Feet, Flush with the top of the 4040, Needs angled power supply cord. I also mounted the switch from the out side to the inside of the cover to get a little more space. I have a rear mounted motherboard/PI case. The reason why i moved the power supply was due to the Dual Z and wanted the fan facing down. Will post pics as soon as i get around to it.
(right and left front legs needs the parts edited so hold off on printing)
Print Settings
Printer:
Hypercube Evo
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15
Category: 3D Printer Parts