Rising Ghost Fidget - Print-in-Place Telescoping Halloween Ghost, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lift it by the head and this little ghost rises out of itself to twice its height. Prints in one piece, no supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A ghost that rises out of itself: lift it by its pointed head and four sections slide out to more than twice its height, then set it down and it sinks back. Lips on every section catch, so it never comes apart.
DETAILS
• 55 mm tall collapsed, about 117 mm risen, 60 mm wide, with a wavy hem and a little face.
• Prints collapsed in one piece with no supports: the catch lips have 45-degree faces and the head is pointed. Bambu Studio: 1 h 01, 27 g, no warnings.
• After printing, give each section a gentle twist to free it. Glow-in-the-dark filament works well.
CUSTOMIZE (OpenSCAD)
Number of sections, width, section height, clearance and the face.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.