Tracker Tag Keyring Holder - Snap-In Case for 32 mm Round Trackers (AirTag-Sized), No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-in keyring case for 32 mm round Bluetooth tracker tags. The tag clicks past a lip; its face shows on top.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Put a round Bluetooth tracker tag on your keys, bag or dog's lead: the tag pushes in past a flexible lip and stays put, with its face showing through the top. A finger hole in the back pushes it out again.
DETAILS
• Sized for 31.9 x 8 mm round tags (AirTag-sized); change the numbers for other round tags.
• Two holders on the plate. Prints flat with no supports: the retaining lip has a 45-degree underside and the keyring loop lies on the bed. Bambu Studio: 19 min, 6 g, no warnings.
• Best in PETG or TPU so the lip flexes.
CUSTOMIZE (OpenSCAD)
Tag diameter and thickness, fit clearance and how many.
Designed with AI assistance (OpenSCAD). Not affiliated with any tracker brand. Rendered images; not printed yet.