1 / 2
Action Figure Ball/Barbell Joint Separator Tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small device designed to help pop small barbell and ball joints out from action figures and the like.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a tool redesigned to help pop barbell ball joints out of action figures. It has 3 parts. Two sides each with forks to pry the barbell out of the joint using leverage. The middle portion is good for larger joints to yank the part out directly. It can also be resized for larger ball joints if needed.
I'd recommend printing the model solid with 100% infill and out of a strong somewhat flexible material like PETG or ABS. PLA still works though but be careful of potential breakage.