Nebula Camera Mount on X Gantry for Ender 3 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera mount fits on the X gantry tensioner wheel on the right side of an Ender 3 Pro
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Nebula Camera mount allows the camera to ride along the X axis as it rises during a print. The original version I remixed didn't have a cutout for the large bolt head of the X axis tensioner block that my Ender 3 Pro has. The original screws are just long enough to catch and tighten over the added mount and the tensioner bracket.
This version isn't quite as tight as the original, so you'll want a 1/4-20 1/4" bolt to mount the camera. I only had a 5/8" bolt which is why the additional nut is used as a spacer in the photo.
The camera does not quite hit the screen at minimum Z, though I am using a glass bed so my Z minimum is a mite higher than stock.
Printed in PLA, oriented with the right side of the mount on the bed and tree supports, same as the original creator suggested, worked well for me.