Filament dispenser box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are many filament spool holders available, with numerous geometries and types.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1688
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
There are many filament spool holders available, with numerous geometries and types. However, all I tried so far worked with loose spools that I had to juggle around when switching filament. I wanted a simple system which serves as filament storage and allows easy access to the filament for use.
The idea as such is not new, there are similar designs available. This solution uses regular containers available at your local hardware store and a cheap plastic pipe. Additionally some pneumatic quick connectors, Teflon tube, M4 screws and zip ties are used.
My 3D printer is placed in an Ikea box with the filament dispensers on top. A feedthrough with an additional Teflon tube brings the filament inside. So far it's been working great.
Print instructions
Required parts:
- Storage box (mine are approximately 370x270x270 mm)
- Tube or similar (up to 25 mm diameter)
- Pneumatic quick connectors + M5 nuts
- Teflon tube
- M4x20 screws + nuts
- Zip ties (optional, to keep the spools in place)
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 20%
Notes:
Printed in PETG, but PLA should also works just fine.