1 / 4
Spule für Refill Filament - Spool for Refill Filament — zdjęcie 1
1 / 4

Spule für Refill Filament - Spool for Refill Filament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spule für 2 kg Refill Filament - Spool for 2 kg of refill filament

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Refill Filament wird normalerweise immer ohne Spule geliefert. Wenn man das auf den Drucker hängt, ist immer mit Verknotungen und Verwicklungen zu rechnen. Damit das nicht passiert, habe ich diese Spule entworfen.

Gedruckt mit PETG (PLA ist auch möglich).

An zusätzlichem Material werden noch 4 Einschmelzmuttern M4 und 4 Schrauben M4x10 benötigt.

Ansonsten ist alles selbsterklärend.

Über Makes und Likes würde ich mich freuen.

Viel Spaß beim nachbauen.

Refill filament is usually shipped without a spool. When you load it onto the printer, you can always expect knots and tangles. To prevent that from happening, I designed this spool.

Printed with PETG (PLA is also an option).

You’ll also need 4 M4 melt-in nuts and 4 M4x10 screws.

Otherwise, everything is self-explanatory.

I’d appreciate any “Makes” and “Likes.”

Have fun building it!

Tagi