1 / 2
Wall Half-Planter - D-Shaped Pot with Keyhole Mounting for Herbs and Succulents (OpenSCAD) — zdjęcie 1
1 / 2

Wall Half-Planter - D-Shaped Pot with Keyhole Mounting for Herbs and Succulents (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A D-shaped pot with a flat back that hangs on two screws through keyhole slots. Herbs, succulents or pens.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Grow herbs by the kitchen window or put succulents on a bare wall: a D-shaped pot with a flat back that hangs on two screws through keyhole slots, so it lifts off for watering. Also a handy pen or brush holder by a desk.

DETAILS

• 130 mm wide, 90 mm tall pot, 40 mm deep, with a back plate 115 mm tall.

• Prints upright with no supports: the pot is open at the top and the keyholes have pointed tops. Bambu Studio: 1 h 49, 48 g, no warnings.

• No drainage hole, so use a nursery pot inside or water carefully.

CUSTOMIZE (OpenSCAD)

Width and height.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi