Drill Bit Organizer - Labelled Stepped Stand for 19 Bits from 1 to 10 mm, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A three-step stand with labelled holes for 19 drill bits from 1 to 10 mm, so you always grab the right one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No more squinting at tiny numbers on drill shanks: every bit has its own labelled hole on a three-step stand, and a gap shows you straight away which one is missing.
DETAILS
• 19 holes from 1 to 10 mm in half-millimetre steps, with 0.3 mm clearance; 100 x 66 mm, 38 mm tall at the back.
• Prints upright with no supports: the holes are open at the top and the sizes are carved into the steps. Bambu Studio: 1 h 56, 57 g, no warnings.
CUSTOMIZE (OpenSCAD)
Smallest and largest size, the step (0.5 or 1 mm) and the hole clearance.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.