Arcana Rising - Casting Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I snapped my original cardboard casting board (moons board) in Arcana Rising. So, I made a replacement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
How to Print
Print without supports.
Multi toolhead printer is highly desirable to reduce purge waste between colour swaps.
Optimized for 0.16mm layer height unless stated otherwise.
Optimized for 0.4mm nozzle unless stated otherwise.
Casting Board 1 of 2
Print 1.
I printed at 0.16mm layer height.
Using the .3mf file, the objects should be already coloured as required.
Alternatively, change colours at the following layer heights (using 0.16mm layer height):
Layer 1 / default filament - black
Layer 20 - change to red
Layer 21 - change to black
Layer 23 - change to white
Casting Board 2 of 2
Print 1.
I printed at 0.16mm layer height.
Using the .3mf file, the objects should be already coloured as required.
Alternatively, change colours at the following layer heights (using 0.16mm layer height):
Layer 1 / default filament - black
Layer 23 - change to white
Connectors
Print 3 (or use the .3mf which has 3)
These are small, you may need a brim.
Print settings:
Print with 0.16 layer height
(Optional) Use brim for connectors - not required with BIQU CryoGrip Pro plate.
Fits in the box nicely with this organiser: