1 / 2
Flexi Caterpillar - Print-in-Place Wiggly Toy with a Smiling Face, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Flexi Caterpillar - Print-in-Place Wiggly Toy with a Smiling Face, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print-in-place wiggly caterpillar with a big smiling head and antennae. It comes off the plate moving.

Ocena
5 / 5
Polubienia
3
Pobrania
18
Wydruki
1
Wyświetlenia
53
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A print-in-place wiggly caterpillar with a big smiling head, antennae and little feet. No supports, no assembly: it comes off the plate already moving.

DETAILS

• 10 segments, about 168 mm long in its wiggly printed pose.

• Each joint is a double-cone pin captured in a matching socket, so it can't pull out up or down, and every surface is 45 degrees or steeper. Clearance 0.65 mm: print at 0.2 mm layers with the first layer well squished, then flex each joint to free it. Bambu Studio: 1 h 06, 19 g, no supports.

CUSTOMIZE (OpenSCAD)

Number of segments, the wiggle of the printed pose and the joint clearance.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi