Snack Thief Ghost Candy Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snack Thief Ghost Candy Bowl. Free STL, K2 Plus 3MF, and print guide. Supports required.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Standard Digital File License
Snack Thief Ghost by CrystalDawn Prints.
A mischievous ghost holding an open candy bowl. The broad scalloped base and arms are part of one connected print.
The model is approximately 6.70 inches wide (170.2 mm), 6.68 inches deep (169.8 mm), and 4.84 inches tall (123.0 mm).
This free download contains an STL model, a Creality K2 Plus 3MF print project, and a print guide. This is a free digital model, and no physical object is included.
The supplied Creality K2 Plus projects use a 0.4 mm nozzle, 0.16 mm layers, a 0.20 mm first layer, three walls, 10 percent gyroid infill, and an 8 mm outer brim. Supports are required. Automatic tree supports are enabled for the model in the supplied 3MF. Keep them enabled when slicing. The saved PLA temperatures are 220 C for the nozzle and 50 C for the bed. Use temperatures appropriate for your filament and printer.
Print upright on the flat underside. Allow the bed to cool, remove the outer brim, and inspect the face and folded hem before use.
Use the bowl for wrapped candy or dry decorative items. Use a suitable food safe insert for loose food.