[DRAFT] Quick remix of the Chell's Facial Tracker mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Chell's Facial tracker mount, edited to not be held by the expansion port.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
Edited the bottom part to be held by the sides of the nose piece instead of the expansion port. This is a DRAFT so do not expect a perfect fit. but it was made using the released steam-frame 3D files from valve.
Does work and holds in place a light GC0308 camera. Print the rest of the files from the original listing.
Printed in PETG with a 45 degree angle with organic supports.
Fit the top part first and then gently press the bottom part together to snap it in place
I'll will likely not work on this model further as it works good enough for me
I am not responsible for scratches or damage on your headset.