Common wooden stool TPU footpad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU foot for common wooden 2 step stool with rectangular legs.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We have two of these simple wooden stools in our house. One kept sliding out from under me, so I made these basic footpads and they work great for me. They can be glued down, but there is also a hole for a screw with enough depth to keep a screw head from scratching the floor. I printed in TPU 95A. I didn't dry the filament, so the final print was pretty stringy, which you can see in the photo.
One of the stools I have has slightly narrower legs, so there are two width options. Both are 37.3 mm long.
Narrow = 17.2 mm wide.
Wide = 18.5 mm wide.
One of the photos is just of the stool so you can get a reference. Obviously, your mileage may vary. Test your prints' traction under the stool before using them freely.