Halloween - Scared Demon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Halloween - Scared Demon
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hueforges can be resized, only change the X and Y scale, leave the Z height the same.
Halloween - Scared Demon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 3.2
PLA Elegoo Grey Transmission Distance: 3.4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey (Darker)
At layer #12 (1.04mm) swap to Grey
At layer #16 (1.36mm) swap to Jade White for the rest or
Border Only Colors.
At layer #23 (1.92mm) swap to Black or any color for the rest.
If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!