1 / 9
Electric Hand Planer Wall Mount — zdjęcie 1
1 / 9

Electric Hand Planer Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mount for Electric Hand Planer

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Simple wall mount for Electric Hand Planer, this design uses two printed wall brackets and a removable crossbar to hold the planer securely in place. The planer rests between the brackets, while the crossbar helps prevent it from coming out of the mount. This was designed for WEN 6530 Planer but it might with other make/models.

  •  Designed for convenient wall storage of an electric hand planer

  • Uses two independent wall-mount brackets

  • Adjustable bracket spacing

  • Removable retaining pin

  • The pin can be 3D printed or replaced with a 3/8 inch/9.53mm dowel

  • Easy to install and use

  • Keeps the planer off the workbench and within easy reach

  • Simple and compact design for workshop organization

Print profile includes 2 wall brackets and 1 retaining pin

 Printing Recommendations

  • Material: PETG recommended

  • Layer Height: 0.20 mm

  • Walls: 4 or more

  • Infill: 15–20%

  • Infill Pattern: Gyroid

Important Notes

This design has been tested with my own setup and is working well for me. The strength and performance of 3D-printed parts can vary depending on the material, printer calibration, print orientation, wall count, infill, and other print settings.

Tagi