XGecu T48 Programmer Case — D42 Adapter Storage & Two-Color Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enlarged T48 case with D42 adapter storage, USB access for use in place, and a flush two-color lid label.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Enlarged remix of CYUL’s T48 programmer case. The accessory compartment is widened by 65 mm to accommodate an ADP_D42_EX-A adapter, with additional space behind the programmer for an ADP-017 and cables.
https://bbum.net/2026/10/xgecu-t48-programmer-case/
The original programmer cradle and USB opening are preserved, allowing the T48 to remain in the case during use.
Overall dimensions: 220 × 105.5 × 51.2 mm. The D42 storage envelope is 90 × 80 × 40 mm.
The lid features flush, 0.8 mm-deep “XGecu T48 / EPROM PROGRAMMER” lettering. Print the lid exterior face down, assigning its lettering to a second filament.
Suggested settings: 0.4 mm nozzle, 0.20 mm layers, four walls, 20% gyroid, supports off. Includes a two-color Prusa XL project and editable STEP files.
STEP files for CAD editing. STL for manual layout. Prusa XL 3MF for convenient single plate prints.
(AI was used to enlarge the wonderful design that CYUL created to make it larger to fit the larger adaptor board that came with my kit and to embed the lettering in the lid.)