Tiny 6 cm Paint Pot – ONLY 1.7 g Ultra- Low filament usage - Single-Color Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny paint pot for small amounts of color, grease or glue. Uses very low filament
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This tiny paint pot is designed for holding a small amount of a single paint color while painting, crafting, or working on models.
With a diameter of only 6 cm, it is compact enough for repair works, grease or glue. The biggest advantage: it requires just 1.7 g of PLA, making it perfect for using up short filament leftovers and partial spools that would otherwise be difficult to reuse.
Features
Holds one paint color at a time
Compact 6 cm diameter
Extremely material-efficient: only about 1.7 g of PLA
Great for acrylic paints, craft paints, watercolors, and similar hobby paints
Ideal for using up filament remnants and short leftover lengths
Quick to print and easy to replace
Suitable for painting miniatures, models, DIY projects, and craft work
Why this design?
Often I have to use a little bit of color:
for paint repair works
for apply grease with a brush
For mixing a small amount of 2-component glue
Because it uses so little material, it is also a practical way to turn leftover filament into something useful.
Printing
Material: PLA (other common materials should also work)
approximately 1.7 g
60cm filament
No supports required (depending on your printer and orientation)
Print with enough wall thickness for a stable, watertight-ish cup
Notes
Not intended for food use.
Check compatibility with your paint and cleaning method; some solvents may affect PLA.