Spirit Island Invaders — four-colour explorer, town and city, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Colonist explorer, half-timbered town and clock-tower city in four colours. Ready plates, no supports, no glue.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
A full set of invader pieces for Spirit Island, printed in four colours straight off the plate:
Explorer: a colonist in a red coat and tricorn hat, carrying a musket.
Town: a half-timbered cottage with shutters and a chimney.
City: a guild hall with a clock tower, a spire and a small side house.
Every piece comes off the printer finished and coloured: no supports, no glue, no assembly, no painting. The windows, timbers, shutters and stone corners are flush colour inlays, so nothing breaks off in the box. The photos are the actual print, a whole base game plus Jagged Earth set, from a Bambu Lab P2S with AMS.

Sizes
piece | footprint | height | weight |
explorer | Ø11.2 mm round base | 16 mm | 0.4 g |
town | 15 × 12 mm | 17.7 mm | 2.0 g |
city | 21 × 16 mm | 22.5 mm | 3.0 g |
They stand in about the same space as the original wooden pieces, so a crowded land on the board stays readable.
Files
file | what it is |
| 2 explorers, 2 towns and 2 cities. Print this first to check the size and colours. |
| 65 explorers on one plate |
| 48 towns on one plate |
| 30 cities on one plate |
| one piece as four colour bodies (grey, cream, red, black) for any other slicer or count |
The 3MF plates open with the four filaments already assigned to the right parts. The STL bodies share one origin: import the four files of one piece together and answer Yes when the slicer asks whether to load them as one object with multiple parts. Then set the filaments. Do not use Split to Parts on them: the windows and timbers are many separate islands, so Split to Parts makes 40+ parts.
Colours
filament | colour | used for |
1 | grey #8A8D91 | bases, tower stone |
2 | cream #EFE6CF | plaster walls, chimney, face and hands, cravat, stone corners, clock face |
3 | red #B8322A | roofs, spire, shutters, explorer coat |
4 | black #1A1A1A | timbers, windows, doors, hat, boots, belt, musket, clock hands |
Any red works, so you can match your own player-board red. Matte PLA reads best on the table.

How many to print
piece | base game | Jagged Earth | total | plate |
explorer | 40 | 25 | 65 |
|
town | 32 | 16 | 48 |
|
city | 20 | 10 | 30 |
|
Branch & Claw adds no invaders. With the base game only, delete the extra pieces from each plate before slicing.
Printing
0.4 mm nozzle, 0.16 mm layers (High Quality profile), PLA.
No supports, no brim. Every face leans 45° or less: the roofs are stepped tile rows, and the hat brim and tower corbel are 45°. If the slicer suggests supports, answer No.
Prime tower on (it is already placed in the 3MF files).
plate | filament | time |
explorers (65) | ~74 g | ~7 h |
towns (48) | ~123 g | ~12 h |
cities (30) | ~154 g | ~16 h |
sampler (2 + 2 + 2) | ~114 g | ~9 h |
Grams and times are from the slicer with a P2S profile and include the colour purge. Purge is spent per layer, not per piece, so full plates waste little and the six-piece sampler is mostly purge. To test cheaply, delete pieces from the sampler or print one piece in a single colour.

Good to know
To scale them, scale all parts of a piece together in the slicer. At 100 % the explorer's hands and the clock hands are already close to the smallest detail a 0.4 mm nozzle prints.
Pull the explorers off the plate by the base, not by the musket.
This is an unofficial fan-made upgrade for players who own the game. It is not affiliated with or endorsed by Greater Than Games.
The rest of my printable catalogue, with photos and links, is at https://morass.github.io/prints/
