Wooster Pro Roller to Simple Hotdog Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece adapter to use Wooster Pro 4-inch rollers with your simple rod-style roller.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I bought the wrong rollers, but a few minutes in CAD and I was painting in less time than it would have taken to schlep back to the hardware store.
Prints in two pieces with interference fit on the roller frame on one piece and the roller itself on the other so that they can roll. This isn't perfect, and if you have a lot of painting to do, you should probably buy the right tool. However, if you're in a pinch, this can get you where you need to go.
I suggest printing in extra-draft, largest layer height you can for your nozzle and 5% infill. This part will be thrown out with the roller when you're done, or at least that's my plan.