tslot stud and star knob(GB15180/minicnc 3018 pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable M6 T-slot stud + star knob for the CNC 3018 bed (SCAD included)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
# Printable M6 T-slot stud + star knob for the CNC 3018 bed
A fully 3D-printed clamping stud for the aluminium bed of the CNC 3018 / 3018 Pro
(GB15180 profile, 8 mm slot opening). No metal bolts or T-nuts needed.
## Files
- M6_tslot_stud_CNC3018.stl: T-slot stud. Slides in from the end of a bed slot and cannot rotate.
- M6_star_knob.stl: 6-lobe star knob with M6 female thread.
- tslot_stud_and_star_knob_M6.scad: parametric OpenSCAD source.
## How it works
- The head follows the slot cross-section. It bears on the undersides of the slot lips and
steps down along the sloped walls into the floor and centre groove, so it sits snugly and cannot turn.
- An unthreaded 7.2 mm neck passes through the 8 mm slot opening. The M6 thread starts just below the bed surface.
- The stud length is set for clamping a 5 mm thick part. The stud tip ends flush with the top of the knob.
## Print settings (recommended)
- Material: PETG.
- Layer height: 0.12 mm for clean threads.
- Stud: print upright, head down. Tree supports may help under the sloped faces.
- Knob: print flat.
## Customising (OpenSCAD)
- CLAMP_THK: thickness of the part you clamp; the stud length follows it.
- CLR: clearance to every slot face (0.4 mm for PETG). Use 0.3 if it is loose, 0.5 if it is tight.
- EXT_MAJ, INT_MAJ: thread fit. Adjust in 0.1 mm steps.
- SLOT_PTS: slot cross-section, if your bed profile differs.
## License
CC BY 4.0
Created By Oguzhan Erkan
15.10.2026
