Fridge magnet eppendorf tube holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
hanging 1.5-2 ml tube holder, low material, no supports in several variants.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
Small and nifty printable test tube holder with magnet holes and slanted top for easier access. Requires 10x3 mm neodymium magnets.
Versions include:
regular version with 5 holes
long 10 tubes version
3 magnets version (the normal one works well enough but you can still move it around with a bit of force) for extra safety
tight fit version (the holes are slightly smaller for printing on perfectly calibrated printers or for people that don't like loose fit stands)
The one in the photo was printed from waaay too wet generic PETG in around an hour, 3 walls, 0.26 layer height on Anycubic kobra s1. Magnets fixed in place with cyanoacrylate (superglue).