Dog Bowl Stand for exterior float bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dog Bowl Stand for exterior auto-filling float bowl (small livestock bowl).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dog Bowl Stand for exterior auto-filling float bowl. This bowl (or style of bowl) is often used outside for livestock or pets. Generally you would mount this to a fence or wooden wall. Our house is all brick, I didn't want to mount it to brick, and we were unhappy with other bowl options as they are not as reliable (and you can get spare parts for this style).
The bowl used in pictures is - https://www.amazon.com/dp/B0GDZPRW4W
Uploaded is a V2 of the mount - with minor changes & enhancements made after the first print in the picture. I reduced the height of the top bracket over the bowl & reduced the length of the legs as in V1 they were extended in front of the bowl slightly.
The "tray" at the bottom is for additional counterweight (rocks or similar) to prevent enthusiastic pups from knocking it over.
I used stainless HW - 2 m5 bolts and 4 fender washers to mount - which let me adjust the left/right angle slightly so that the overflow on the right side is slightly higher.
I started this concept out of wood then transitioned to openscad and used AI to assist in refinements when i decided i would print it.
